What Are The Factors Behind The Vanishing Mold Process Fire?

In recent years, with the progress of casting production technology, lost mold casting is a hit in the casting industry. A considerable number of foundry manufacturers tend to use the lost mold process to produce casting parts. So, what are the factors behind the vanishing model fire?

 

It can be sought after by the majority of foundry manufacturers, and it must have advantages that other casting processes are difficult to achieve.

 

1. Lost mold casting can greatly reduce the cost of production;

 

2. This casting process will simplify the design of the factory, the fixed asset investment of the lost mold casting factory can also be reduced by about 30 to 40 percent, the floor area and construction area can also be reduced by about 30 to 50 percent, and the power consumption can also be reduced to about 10 to 20 percent;

 

3. Manufacturers can complete castings of any size according to the melting capacity and then use the lost die casting process.

 

4. Lost mold casting is more suitable for group casting, dry sand buried sand removal is easier than other traditional processes, for some materials of castings, manufacturers can also carry out waste heat treatment according to the use.

 

5. The lost mold casting process is widely used, not only for casting steel, cast iron, but also for casting copper and aluminum, etc.

 

6. Lost mold casting manufacturers can not only use the lost mold to cast castings with relatively simple geometric shapes, but also can do multi-open edge, multi-core geometric complex castings that are difficult to start with ordinary casting;

 

Seven. The shape of the casting is not limited by the traditional process, which liberates the mechanical designer in practice, so that the casting can be free to design the most ideal casting shape according to the performance of the parts;

 

8. The vanishing die can also reduce the weight of the casting;

 

9. In the state of microseismic pouring, it will promote the formation of special requirements of the metallographic structure, but also more conducive to improving the internal quality of the casting, these are lost mold casting process can be achieved;

 

10. When pouring in the dry sand combination, sand removal is also relatively easy, the temperature will be synchronized, so the lost mold casting manufacturers can use waste heat for heat treatment, especially the water toughness treatment of high manganese steel castings and the solid solution treatment of heat-resistant steel castings, the effect is very ideal, greatly saving the waste of energy and shortening the construction period.